how to make ring light at home?


A ring light is a circular light that is used in photography, videography, and makeup tutorials. It is used to create a soft, even, and diffused light source that helps to eliminate shadows and provide a well-lit subject. Ring lights can be expensive, but they are also easy to make at home with a few simple materials. In this article, we will guide you on how to make a ring light at home.

Materials Required:

To make a ring light, you will need the following materials:

  1. PVC Pipe
  2. LED Strip
  3. Power Supply
  4. Wire
  5. Soldering Iron
  6. Soldering Wire
  7. Switch
  8. Cardboard
  9. Glue Gun
  10. Scissors
  11. Ruler
  12. Pencil

Step-by-Step Guide:

Here are the steps to make a ring light at home:

Determine the Size of Your Ring Light:

The first step in making a ring light is to determine the size you want your ring light to be. The most common sizes for ring lights are 18 inches, 14 inches, and 12 inches. For this tutorial, we will make a 14-inch ring light.

Cut PVC Pipe:

Using a ruler and pencil, mark the PVC pipe into four equal parts. Cut the PVC pipe at the markings using a saw. You should have four PVC pipe sections of equal size.

Bend the PVC Pipe:

Bend the PVC pipes to form a circle. Use a heat gun to heat up the PVC pipe and bend it to form a circle. Hold the PVC pipe in place until it cools down and retains its shape.

Attach the PVC Pipe Sections:

Using a glue gun, attach the PVC pipe sections together to form a circular ring. Make sure the PVC pipe sections are attached tightly and the circle is secure.

Cut the Cardboard:

Cut a piece of cardboard in the shape of a circle with the same diameter as the PVC pipe ring.

Attach LED Strip:

Attach the LED strip to the cardboard circle using a glue gun. Make sure the LED strip is attached securely to the cardboard.

Wire the LED Strip:

Connect the LED strip to the power supply using wire and a switch. Use a soldering iron to solder the wires to the LED strip and switch. Make sure the wires are connected properly and securely.

Attach the LED Strip to the PVC Ring:

Attach the LED strip to the PVC ring using a glue gun. Make sure the LED strip is attached securely to the PVC ring.

Connect the Power Supply:

Connect the power supply to the switch and the LED strip. Turn on the switch to test the ring light. If it doesn’t turn on, check the wiring and connections.

Finish the Ring Light:

Once the ring light is working, you can finish it off by covering the LED strip with diffuser paper or white cloth. This will help to diffuse the light and make it softer.


Making a ring light at home is a fun and easy DIY project that can save you money. With a few simple materials and some basic tools, you can make a ring light that is just as good as the ones you buy in stores. Follow the steps above to make your own ring light and take your photography, videography, or makeup tutorials to the next level.

Leave a Reply

Your email address will not be published. Required fields are marked *